LS2 Rapid II Chin Mount
$29.99
Sale price
$29.99
Regular price
Skip to product information
Fits GoPro · Insta360 · DJI Osmo Action
LS2 Rapid II Chin Mount
$29.99
Sale price
$29.99
Regular price
A camera chin mount made for one helmet the LS2 Rapid II. The mounting face is shaped to this helmet's chin bar, so the mount sits flush and your camera sits low, level and locked in. No drilling, no straps, no chin-strap rattle.
- No drilling
- Fits in 5 minutes
- 3M VHB
Standard Clip Interface
Standard two-prong action-camera interface, the same fitting GoPro has used for years.
- GoPro: HERO line, mounts straight on
- Insta360: X series and Ace series, using the two-prong cradle that ships with the camera
- DJI Osmo Action: using the two-prong cradle that ships with the camera
- Any action camera or adapter that uses a two-prong mount
Helmet-Specific Fitment
Designed for the LS2 Rapid II helmet only. Chin surface geometry changes from model to model, so a mount shaped for a different helmet will not sit flush and will not bond properly.
Riding a different helmet? Find your model here →
Fitting it takes about five minutes
- Wipe the chin bar with isopropyl alcohol and let it dry completely. This step decides how well the mount holds.
- Dry-fit the mount and check your framing before you peel the liner.
- Peel, press hard for 30 seconds, then leave it 24 hours before you ride.
Fit it somewhere warm, between roughly 70 and 100°F (21 to 38°C). 3M VHB reaches most of its bond in the first 24 hours and full strength at around 72 hours.
Specifications
| Fits | LS2 Rapid II |
| Camera interface | Two-prong, GoPro-style |
| Attachment | 3M VHB adhesive, no drilling |
| Construction | 3D printed, matte black |
| Position | Chin, centered for true rider POV |
FAQ
Will it hold at highway speed?
The chin is the lowest-leverage spot on a helmet and the mount is deliberately low-profile, so there is very little for the air to grab. The single biggest factor is prep. A chin bar cleaned with alcohol and left to cure a full 24 hours is what makes the bond hold.
Will it wreck my helmet's finish?
VHB is designed to come off. Warm the mount gently with a hairdryer, peel it back slowly rather than pulling straight out, and lift any residue with an adhesive remover.
Does it change my helmet's safety rating?
Nothing is drilled and nothing is cut, so the shell and the EPS liner are untouched. Worth knowing either way: any accessory added to a helmet sits outside the testing the helmet was originally certified under.
Why 3D printed?
Because it is the only way to justify manufacturing a different chin interface for every helmet. Injection molding needs one tool per model and thousands of units to pay for it, which is exactly why most mounts on the market are one generic shape with a rubber strap.
Can I move it to another helmet later?
The mount is cut for this model, and VHB is single-use, so refitting it needs a fresh adhesive pad.
- Lifetime Warranty
- Free Returns 30 days
- Precision Engineered